Tsukasa Kogyo Co., Ltd.
facebook
Information Request
Contact Us
Tsukasa Kogyo Co., Ltd.
Tsukasa Kogyo Co., Ltd.
top
Products
  3. Valves and Piping parts
  • Material Receiving and Powder Feeding Process
    Material Receiving and Powder Feeding Process
  • Weighing Process
    Weighing Process
  • Storage Process
    Storage Process
  • Dust Collecting Process
    Dust Collecting Process
  • Mixing Process
    Mixing Process
  • Sifting and Foreign-material Removal Process
    Sifting and Foreign-material Removal Process
  • Crushing and Milling Process
    Crushing and Milling Process
  • Drying and Controlling Temperature Process
    Drying and Controlling Temperature Process
  • Handling Process
    Handling Process
  • Valves and Piping parts
    Valves and Piping parts
  • Difficult-to-process materials
    Difficult-to-process materials
  • PowMaintenance
    PowMaintenance
  • PowTrace
    PowTrace
  • Wrong feeding prevention system
    Wrong feeding prevention system
  • Actual equipment test
    Actual equipment test
Valves and Piping parts

Valves and Piping parts

Highly standardized and durable for a long life. 

Parts for pneumatic transport/chute transport.

"Pneuma parts" for pneumatic transportation are excellent in usability and interchangeability, and are equipped with a variety of functions. In addition, TSUKASA's original "Dacton parts" for chute transporting, have all parts standardized, realizing one-touch assembly and making it easy to maintain.

*"Dacton" is a chute piping component originally developed by TSUKASA in 1973.
"Dacton" was registered as a trademark in 1977.
Pneumatic conveyance
The air flow conveys the powder.
イメージ
⚫︎Pneumatic Parts
　Creating a smooth flow
　For pneumatic transport piping
Chute conveyance
The powder is conveyed by its own weight (gravity).
イメージ
⚫︎Dacton Parts
　Achieved standardization and high quality
　For chute transport piping
イメージ

Various benefits unique to Dacton parts

⚫︎"Selectable piping" with all parts standardized

⚫︎Shorter construction period is realized by one-touch assembly

⚫︎Easy piping connection without welding

⚫︎Highly interchangeable parts, reusable and economical

⚫︎Easy to put on and take off, easy to maintain

⚫︎A wide range of products, including switching valves and gates
イメージ
イメージ

A case study of TSUKASA's Pneuma and Dacton parts in use

Achieving convenience and simplicity by converting steel pipes to dacton
Steel pipes were previously used for chute conveyance, but replacing them required a lot of time and troublesome work. Adopting "dacton parts" that enable use of a variety of parts resulted in a significantly shorter construction times.
The sensor eliminates false detection of "push-up" by powder in the piping
At the switching part from chute transport to pneumatic transport, if powder adheres to the piping, it is erroneously detected as being "pushed-up" with powder adhering inside the piping. By adopting "Sensor Sport", it is now possible to correctly recognize the state of "flowing inside the pipe" without being misled by the adhering powder.
イメージ
イメージ

Customized at the request of the customer

Change-over valve specification changed in accordance with CE (EU standard)
The specification of the two-way switching valve has been changed to comply with the safety standard of the EU. The acquisition of the CE mark by us contributed to the expansion of sales channels of our customers.
Developed a switching valve for secondary battery manufacturing equipment
We interviewed the customer to hear about the physical properties of the powder the customer deals with and the conditions such as "copper-based not allowed", and we made all parts made of stainless steel.
イメージ
イメージ
  • Dacton Parts

    Dacton Parts

    These parts are used for chute conveyance piping.

    MORE　＞
  • Two-way Valves

    Two-way Valves

    These parts switch the powder flow direction with a damper, and changes destinations.

    MORE　＞
  • Pneumatic Parts

    Pneumatic Parts

    These parts are used for pneumatic conveyance piping.

    MORE　＞
  • Powder Slide Gate

    Powder Slide Gate

    This slide gate is for powder. We offer the motor type and manual type.

    MORE　＞
  • Powder Flap Gate

    Powder Flap Gate

    This flap gate is installed in the discharge port of dust collectors, bottom of cyclones, tanks, bottom of silos, screw feeders, mixers, etc.

    MORE　＞
  • Multi-directional Distributor

    Multi-directional Distributor

    This parts distribute powder to discharge ports if there are a multiple number of them.

    MORE　＞
  • Sampling Equipment

    Sampling Equipment

    This is a device installed on pneumatic conveyance piping to sample powder flowing inside the pipe.

    MORE　＞
If you want to request or download detailed information, or consult with us about technologies or ask questions about our products, contact us from this page.
お問い合わせ
Information Request
お問い合わせ
Contact Us
  • Material Receiving and Powder Feeding Process
    Material Receiving and Powder Feeding Process
  • Weighing Process
    Weighing Process
  • Storage Process
    Storage Process
  • Dust Collecting Process
    Dust Collecting Process
  • Mixing Process
    Mixing Process
  • Sifting and Foreign-material Removal Process
    Sifting and Foreign-material Removal Process
  • Crushing and Milling Process
    Crushing and Milling Process
  • Drying and Controlling Temperature Process
    Drying and Controlling Temperature Process
  • Handling Process
    Handling Process
  • Valves and Piping parts
    Valves and Piping parts
  • Difficult-to-process materials
    Difficult-to-process materials
  • PowMaintenance
    PowMaintenance
  • PowTrace
    PowTrace
  • Wrong feeding prevention system
    Wrong feeding prevention system
  • Actual equipment test
    Actual equipment test