Information Request
Contact
CloseValves and Piping Parts
Two-way Valves
PowChange Middle Metal touch Automatic Model (PC-MMA)
Features
- Small pressure loss, smart and light.
- Since it is ultra light, support and attachment construction are easy.
- Shaft seal is labyrinth type and dumper employs stainless metal special seal (PAT.P.), which prohibits sealing material from being mixed with powder.
Applications
Damper allows switching of direction on flow of powders and granules.
Specifications
- Materials:
Area in contact with powder - Stainless steel
other areas - Steel (unichrome - plated) - Cylinder air pressure: 0.4MPa to 0.6MPa
- Standard equipment: Pneumatic cylinder, solenoid valve, and cylinder switch
- Options:
Explosion specifications, secondary battery specifications, surface treatment (adhesion prevention, curing treatment, buffed finish etc.)
- If a piping diameter other than the nominal diameters for the models listed above is required, fit using a taper.
- Mating flange (SS) and rubber packing (EPDM white) are standard.
- Please inform when you use in case of as follows.
1.When you use in suction line. 2.When you use at outdoor. 3.when you use for abrasive powder. - Specify the following details when ordering:
1.Model 2.Solenoid valve specifications 3.Cylinder switch voltage and quantity 4.Conveyed material and conveyance method
Optional connection specifications
Acrylic view port
Sanitary joint
Quick Clamp
Reducers for SGP and other different-diameter connections are also available.
Drawings/Dimensions
