Testing Environments

---

TSUKASA prepares actual equipment for clear and better explanations on processes.

---

TSUKASA prepares various actual equipment used in various processes.
Simulation processing that reflects the needs of customers can be experienced. This will enable for development while surely confirming the adequacy of the equipment's design. Furthermore, the product quality of equipment that customers are considering introducing to their production can be checked at an early stage.

テストの流れ

1. Application from an inquiry form on the website
2. Contact from a representative
3. Testing

Equipment for which testing can be conducted

Material Receiving / Powder Feeding Process

The functions of supplying and opening bags and disposing of empty bags (which are necessary for the process of opening bags and feeding powder) are built into one unit. We conduct testing of the functions.

---

---

対応設備の詳細はこちら

---

---

Weighing Process

説明文

---

---

対応設備の詳細はこちら

---

Mixing Process

We conduct testing for easy and precise mixing of powder with different grain sizes and specific gravity.
ツカサ工業の粉体機はAIB基準をクリアする高度な安全基準を実現した機器を使用しているためコンタミの心配がありません。
The equipment can process materials without changing the mixture's grain sizes and shapes. I t leaves a very small amount of adhered materials.
ムリ・ムダのない精度の高い混合に関するご相談は、ツカサ工業へお任せください。

---

---

対応設備の詳細はこちら

---

---

Sifting and Foreign-material Removal Process

We conduct testing for sifting and foreign-material removal.
ツカサ工業の異物除去・ふるい機はAIB基準をクリアする高度な安全基準を実現した機器を使用しているため、高精度の異物除去・ふるい分けを可能にしています。
Foreign metal (iron, etc.) removal using magnets, foreign material removal with a vibrating sieve, and foreign material removal by sorting, etc. are all supported.
ムダのない精度の高い異物除去・ふるい分けに関するご相談は、ツカサ工業へお任せください。

---

---

対応設備の詳細はこちら

---

Crushing and Milling Process

We perform testing related to milling and crushing. We can handle processes ranging from ultra-fine milling (microns) to coarse crushing (millimeters).
粉砕試験に関するご相談は、ツカサ工業へお任せください。

---

---

対応設備の詳細はこちら

---

Drying and Controlling Temperature Process

We implement testing for drying / temperature control for various objects by using ventil ation type shelf drying, fluidized bed drying, vacuum drying, and superheated steam dryers.
If desired, we can offer advice on fluidity , high density and remaining water content necessary for forming powder , or measure samples' grain size distribution after drying and granulation, SEM, grain fluidity, and remaining water content.
ムダのない精度の高い乾燥・調温に関するご相談は、ツカサ工業へお任せください。

---

---

対応設備の詳細はこちら

---

---

---